WARNING: Do Not Run Clutch With Rim Removed.

Installation
Types FMU, UMH, HMU

Type FMU

This type is installed as a unit. Bolt to flywheel of engine and mount universal shaft (spicer shaft) to output end of clutch. To service unit see instructions for clutch module type M.

Type UMH

Remove hub from clutch and install on driven shaft with shaft end flush with hub.
Bolt clutch module in place and mount universal shaft (spicer shaft) on input side.
To service unit see instructions for clutch module type M.

Type HMU

Remove hub from clutch and install on engine or motor shaft with shaft end flush with hub.
Bolt clutch module in place and mount universal shaft (spicer shaft) on output side.
To service unit see instructions for clutch module type M.

BLM/CM AUTOMATIC CENTRIFUGAL CLUTCHES